ProEco Fuel Saver is a chip that users can install in their vehicle to help save money on fuel costs, though it won’t have any lasting impact on the engine or computer system. The device doesn’t require professional installation, and users can save even more by purchasing multiple chips in a single purchase.
What is the ProEco Fuel Saver?
With the constant changes of the economy, as well as the rising costs of gasoline, it has never been quite so difficult to mitigate the financial situation of a single household. Even middle-class families that have maintained their income throughout the pandemic have had to find the means to help themselves through this difficult time. Spending money on gas to fuel a vehicle seems to be one of the costliest and most common expenses, but the ProEco Fuel Saver can be quite helpful.
When the ProEco Fuel Saver is plugged into the user’s vehicle, they start saving money on the gas they put in their car. It uses regenerative braking technology to expand the range of the gas, which just means that the device uses the piston system’s stored energy to start the vehicle (rather than the actual gas). Installation of this device is quite easy, though users won’t have to worry about reaching out to a professional.
Though other services may change the computer system of a vehicle permanently, this chip won’t. The vehicle goes right back to the way it was whenever the device is unplugged. There’s no special maintenance or activation, and users can simply use it on an as-needed basis.
How Does the ProEco Fuel Saver Work?
To get the benefits of saving fuel, users plug in the ProEco Fuel Saver device to the OBDII port. These ports are often hidden to prevent damage since they are not commonly used the rest of the time. However, they are easy to access to plug in the device so that it reroutes the energy stores.
As the device is plugged in, it records data for the first 150 miles to determine the best way to reduce fuel costs for the user. There are no adjustments to be made with the chip plugged in because it takes in all the necessary data to help. Overall, customers report reductions in fuel use by up to 30%.
To install the ProEco Fuel Saver, users should start by turning off their engine and removing their keys. Then, they need to find the OBD2 port, which is usually found behind the cover of the steering wheel. Users can refer to their vehicle’s instruction manual to determine its exact location. Once located, the ProEco can be directly plugged into the port.
After the ProEco Fuel Saver is in place, put the key in the ignition and turn on the power without starting the car. Press the reset button for five seconds, and then wait up to 60 seconds to repeat this step. Then, the car can be started.
For the next 150 miles, the device will examine the performance of the car, making changes to optimize fuel use.
Purchasing the ProEco Fuel Saver
The only way that consumers can get the ProEco Fuel Saver is by going through the official website. Due to the incredible savings, the creators currently have several different packages to choose from, which includes:
- 1 ProEco Fuel Saver for $59.99
- 2 ProEco Fuel Savers for $109.98 ($54.99 each)
- 3 ProEco Fuel Savers for $134.97 ($44.99 each)
- 4 ProEco Fuel Savers for $159.96 ($39.99 each)
If the user finds that they do not get the improved fuel efficiency, they have up to 30 days to get a full refund by contacting customer service.
Frequently Asked Questions About the ProEco Fuel Saver
Isn’t it possible to get an engine tuned by a mechanic instead of using the ProEco Fuel Saver?
Absolutely. Users will get the same performance improvement as using the ProEco Fuel Saver by seeing a mechanic. However, the mechanical tuning method used – remapping – is a permanent change for the vehicle, and it is incredibly expensive. By using the ProEco Fuel Saver instead, the chip can be removed whenever the user no longer wants it to be used, and the vehicle will go back to its original settings.
Are all cars compatible with the ProEco Fuel Saver?
OBD II is the standard for every US and European vehicle for the last 20 years. Keeping a car longer than that can cost more money than it is actually worth. The creators behind the ProEco Fuel Saver recommend upgrading to a vehicle that is safer for the environment and more fuel efficient.
Is there any risk that the ProEco Fuel Saver will impose damage on the car’s engine or computer ECU?
No. This device is meant to work with those systems, and it is only active for the time that it is plugged into the car. Without the chip, the default settings of the car’s computer are restored.
What other ways can consumers reduce their fuel expenses?
Some other ways to improve the amount of money spent on fuel include:
- Fill up the gas tank before the vehicle starts to run empty.
- Getting regular maintenance and service.
- Checking the tire pressure.
- Replacing spark plugs.
- Shopping for the lowest fuel prices.
However, the use of the ProEco Fuel Saver chip is a way that consumers can make an adjustment and forget about it. It plugs directly into the OBD2 socket, triggering these savings whenever the vehicle is turned on.
The customer service team is available for any other questions by calling 1-877-505-3990.
ProEco Fuel Saver provides a simple way that users can improve their fuel usage and energy consumption in their cars. It is easy for anyone to install, though it will need to examine performance data to determine how it can best serve the user. Users can unplug the chip at any time without any physical or electrical damage to their car, restoring it back to its former state.
The links contained in this product review may result in a small commission if you opt to purchase the product recommended at no additional cost to you. This goes towards supporting our research and editorial team and please know we only recommend high quality products.
Please understand that any advice or guidelines revealed here are not even remotely a substitute for sound medical advice from a licensed healthcare provider. Make sure to consult with a professional physician before making any purchasing decision if you use medications or have concerns following the review details shared above. Individual results may vary as the statements made regarding these products have not been evaluated by the Food and Drug Administration. The efficacy of these products has not been confirmed by FDA-approved research. These products are not intended to diagnose, treat, cure or prevent any disease.